Pressure Transducer
Load Cell
Custom Machining
Custom Transducers

High Precision Pressure Transducer ( Gage / Absolute)

Model: SWTJE
  • 0.1% Static Error Band
  • T/C Error <0.0025% FS/°F
  • All-welded Stainless Steel
  • Sealed Strain Gage Circuitry
  • Ranges:0-25 PSI to 0-10,000 PSI
Isolated atmospheric vent chamber on Gage Transducers.   
True Absolute Vacuum Reference with welded vacuum seal.
Products Specifications
Pressure Ranges 0-25 PSI to 0-10,000 PSI
Accuracy +/- 0.1% FS
Sensitivity 3 millivolts / Volt
Resolution Infinite
Overload Pressure 150% Range    
  Calibration Certificate included with 5 point calibration
Temperature, Operating -100°F to +250°F
Temperature, Compensated 70°F to +170°F
Temperature Effect,  Zero 0.0025% FS /°F
Temperature Effect,  Span 0.0025% Reading/°F
Strain Gages Type Bonded foil
Excitation(Calibrated) 10 VDC
Excitation(acceptable) 10VDC or VAC
Bridge Insulation Resistance >5000 megohms   @ 50 Vdc maximum
Bridge Resistance 350 Ohms
Shunt Calibration Data Included
Connector Wiring Code A/B…… +input              C/D…… -input
E    …… -output             F   …… +output
Mating connector (Std incl.) 5 FT PT06A-10-6S(SR)
Welded-on Electrical Connector PT01-10-6P      
Media Gas or Liquid compatible with 17-4 PH 
Burst Pressure 25-5000 PSI ….. >300% Range
5001 to 10,000 PSI.. 200% Range
Pressure Port 1/4-18 NPT Male ranges up through 1500 PSI
Female port above 1500 PSI
Material 17-4 PH Stainless Steel
Weight 11 Ounces
Diameter 1.5 inches
Length 25-500 psig                   2.1 inches
501 to 5000 psig           2.36 inches
5001 psi to 10,000 psi   2.39 inches
Cable Options 15 FT Cable/Connector Assembly, four conductor, color coded, shielded, PVC jacketed, pigtail end and PT06A-10-6S plug.      
Extra Length Available
Options Include Extended Compensated Temperature Range                 
7/16-20 UNF- Male Port (MS33656E4)                            
Integral TFE Cable
0-5 VDC Output
4-20 ma-2wire
0-10 VDC


  Pressure Transducers   Load Cells   Load Cell Accessories   Services  
  High Precision   Compression Only   Base/Pull Plates   Strain Gauging  
  Miniature Flush Diaphragm   Tension Only   Load Buttons   Re-Calibration  
  Steam Sterilizers   Compression/ Tension   Tongue Shackle   Transducer/Repair  
  Flush Diaphragm   Miniature Load Cell   Yoke Shackle      
  Universal Pressure Transducer   Universal Load Cell          
  Universal Differential   Low Profile Load Cell          
      Thru Hole Design Load Cell          
      Internally Threaded Mini Donut