Pressure Transducer
Load Cell
Custom Machining
Custom Transducers

Internally Threaded Miniature Donut Style Load Cell

Internally Threaded Miniature Load Cell
Model: DT
  • Ranges up to 2,000 lbs
  • Calibrated with Positive Output  in Compression
  • All-welded Stainless Steel Construction
  • The Model DT is a precision load cell designed for compression operation.
  • The center tapped hole allows for precise installation alignment.
  • Two, #4-40-2B tapped holes in the base assure stable mounting for repeatability.
Products Specifications
Load Ranges 0-5 lb Thru 0-2,000 lbs
Linearity +/- 0.5% FS
Hysteresis +/- 0.5% FS
Sensitivity / Output 2 mV/V
Repeatability +/- 0.5% FS
Center Thread 3/8-16 UNF Tapped Through
Overload           150% Range
Zero Setting +/- 2 % Output
Temperature, Operating 60-250 F
Temperature, Compensated 60-160 F
Thermal Error, Zero +/- 0.005% FS/Degree F
Thermal Error, Span +/- 0.002 % Reading/Degree F
Strain gage Type  
Excitation (Calibration Voltage) 10 VDC
Insulation Resistance  
Bridge Resistance                     350 Ohms Nominal
Wiring Code  
Weight 2.8 Oz
Material 17-4PH Stainless Steel

5 ft TFE jacketed, shielded cable with strain relief and tinned leads Metric and custom ranges are available.  For optional cable length or threads contact the factory.                   
Connect Load Cell to read-out instrument during installation to avoid over loading in Tension with the center thread.



  Pressure Transducers   Load Cells   Load Cell Accessories   Services  
  High Precision   Compression Only   Base/Pull Plates   Strain Gauging  
  Miniature Flush Diaphragm   Tension Only   Load Buttons   Re-Calibration  
  Steam Sterilizers   Compression/ Tension   Tongue Shackle   Transducer/Repair  
  Flush Diaphragm   Miniature Load Cell   Yoke Shackle      
  Universal Pressure Transducer   Universal Load Cell          
  Universal Differential   Low Profile Load Cell          
      Thru Hole Design Load Cell          
      Internally Threaded Mini Donut