Pressure Transducer
Load Cell
Instrumentation
Custom Machining
Custom Transducers
 

Thru Hole Design

   
Compression Load Cell
Model: DSW
  • Compression Load Cell with optional tapped mounting holes.
  • Ranges from 0-5 lbs up to 0-2,000 lbs
  • All-welded Stainless Steel Construction
  • Frame Sizes from 1.5” up to 3” in diameter
  • Load surfaces ground parallel to avoid off axis loading
  • Flexibility for inside diameter and height..
  • Contact the Factory for details
 
     
 
   
 
     
 
Products Specifications
Load Ranges 0-5 lbs up to 0-2,000 lbs
Linearity & Hysteresis    +/- 0.5% FS
Sensitivity / Output 2 mV/V, Nominal
Resolution Infinite
Overload           150%Range
Zero Setting +/- 2 % FS
   
Temperature, Operating –65 to +250°F
Temperature, Compensated 60 to 160F
Thermal Error, Zero 0.005 % FS/°F
Thermal Error, Span 0.010 % Reading/° F
   
Strain gage Type Bonded Foil
Excitation (Calibration) 10Volts Vdc
Bridge Resistance                  350 Ohm
Wiring Code Red & Black;    + /- Excitation
White & Green: +/- Signal 
Weight Contact factory
Frame Sizes 1.5” up to 3” in diameter
OPTIONS For custom ranges, cable length and temperature compensation, contact the factory Metric dimensions and range units are available.  Center tapped hole available.
 


 

 
                 
  Pressure Transducers   Load Cells   Load Cell Accessories   Services  
  High Precision   Compression Only   Base/Pull Plates   Strain Gauging  
  Miniature Flush Diaphragm   Tension Only   Load Buttons   Re-Calibration  
  Steam Sterilizers   Compression/ Tension   Tongue Shackle   Transducer/Repair  
  Flush Diaphragm   Miniature Load Cell   Yoke Shackle      
  Universal Pressure Transducer   Universal Load Cell          
  Universal Differential   Low Profile Load Cell          
      Thru Hole Design Load Cell          
      Internally Threaded Mini Donut          
             
 
                 
 

HOME | ABOUT US | PRODUCTS | SERVICES
SENSORWERKS©2016